首页/News/Company News/2SP Steel-Wire-Reinforced (Two-Layer) 15 MPa Low-Pressure Hose for API Petroleum Drilling and Production
2SP Steel-Wire-Reinforced (Two-Layer) 15 MPa Low-Pressure Hose for API Petroleum Drilling and Production
release date:2026-11-17 09:42:23
reading volume:
share:

In oilfield drilling and workover operations—including auxiliary fluid transfer, low-pressure circulation loops, and surface-based pneumatic or low-pressure fluid transport—15 MPa-rated service represents the most common operational range. Standard industrial low-pressure hoses are ill-suited for these environments; they lack the necessary resistance to drilling mud and chemical media, and fail to meet the stringent safety specifications mandated by API standards for oilfield drilling and production hoses. When subjected to the complex conditions of a well site, such hoses often suffer from rapid outer-layer degradation or catastrophic pressure-induced bursts. These failures not only disrupt auxiliary operations but also create significant safety hazards. Our 2SP dual-layer steel-wire-reinforced hose, designed specifically for 15 MPa service, is engineered in strict accordance with API Spec 7K. Featuring a lightweight yet stable structure reinforced by two layers of high-strength steel wire, it ensures safe, continuous, and long-term operation at a 15 MPa rated working pressure, providing a highly reliable, API-compliant flexible piping solution for various low-pressure oilfield applications. Lightweight 2SP dual-layer steel-wire-reinforced structure for stable, high-pressure-rated performance. Most standard industrial low-pressure wire-reinforced hoses utilize a simple braided construction, offering a pressure safety factor of only 2–3 times the working pressure—well below the minimum 4-fold burst safety factor required by API standards for oilfield drilling and production hoses. Deploying such hoses in oilfield environments poses a severe risk of hose rupture. In contrast, this 2SP dual-layer steel-wire-reinforced hose employs two layers of high-strength, high-toughness galvanized steel wire, arranged in an interleaved pattern at an optimal winding angle of 54°44′. Through precise mechanical simulation, the tension and orientation of each wire layer have been optimized to ensure uniform stress distribution across the entire hose wall, eliminating any localized weak points under pressure. The two layers of steel wire consist exclusively of high-strength, specialized steel wire designed for oilfield applications, with a single-wire tensile strength of no less than 1800 MPa. The winding tension for each layer is precisely calibrated throughout the process using CNC winding equipment, ensuring that tension deviations are kept to an absolute minimum. This results in a uniform wall thickness across the entire hose, eliminating weak points—such as localized wire bunching or uneven tension—that could compromise pressure resistance. The finished hose boasts a minimum burst pressure consistently exceeding 60 MPa—four times its 15 MPa rated working pressure—fully meeting the 4:1 burst safety factor mandated by the API 7K standard. This provides a safety margin far greater than that of standard industrial low-pressure hoses, enabling the hose to withstand transient pressure surges and water hammer effects common in oilfield low-pressure transport systems, thereby preventing catastrophic hose ruptures. A specialized, highly elastic rubber isolation layer is positioned between the two steel wire layers. This prevents direct contact and friction between the wires—which could otherwise lead to internal wire wear or breakage under pressure pulses—while simultaneously enhancing the overall bond strength of the wire layers, preventing delamination during long-term, high-pressure cyclic operation. This lightweight, steel-wire-reinforced structure has successfully undergone over 100,000 cycles of 22.5 MPa pressure-pulse testing; the hose wall remained completely intact, with no signs of bulging or broken wires. It is perfectly suited for the long-term, continuous, high-pressure pulse demands typical of various low-pressure oilfield transport applications. Furthermore, this lightweight, dual-layer steel wire design significantly reduces the overall weight of the hose—by more than 40% compared to a four-layer steel-wire-reinforced hose of the same diameter—making it much easier for personnel to drag and reposition the lines on the well site, thereby greatly enhancing operational convenience. A specialized material system for low-pressure oilfield applications, featuring a triple-performance upgrade: enhanced resistance to chemical media, weathering, and abrasion. Standard industrial low-pressure wire-reinforced rubber hoses are designed solely for clean hydraulic oil environments; they are entirely unsuitable for the complex media and exposed outdoor conditions found at oil drilling sites. When deployed in such settings, these standard hoses quickly suffer from rapid surface chalking and internal erosion or abrasion caused by drilling mud, failing to meet the long-term operational requirements of oilfield low-pressure fluid transfer. This 2SP (two-layer wire-wound) 15 MPa API-compliant oilfield hose features a material system specifically optimized for the rigorous demands of oilfield operations. It offers a comprehensive performance upgrade, providing superior resistance to chemical corrosion, outdoor weathering, and mechanical wear from dragging. The inner liner—the layer in direct contact with the conveyed medium—utilizes a modified nitrile rubber (NBR) compound engineered for resistance to both oil and drilling mud. The liner formulation can be tailored to the specific medium being transported: for low-pressure drilling mud, a high-abrasion-resistant compound is used to withstand the high-velocity scouring of rock cuttings, preventing premature wear-through; for low-pressure hydraulic oil or compressed air, a high-gas-tightness compound is employed to minimize permeation rates and reduce gradual leakage during long-term operation. The liner material remains effective across a temperature range of -30°C to +100°C and can withstand prolonged exposure to various fluids common in oilfield operations—including low-pressure drilling mud, hydraulic oil, compressed air, and water—without the rapid swelling or degradation typically seen in standard rubber compounds when exposed to such complex, harsh environments. The outer cover is formulated with modified chloroprene rubber designed for oilfield environments. It incorporates specialized additives that provide resistance to abrasion, UV radiation, ozone, and oil contamination. This ensures that, even when exposed to the harsh conditions of an open-air oilfield—characterized by intense UV exposure, high salinity (salt spray), and heavy oil exposure—the outer layer will not rapidly chalk or crack. It is perfectly suited for long-term, continuous operation in various outdoor oilfield settings. The abrasion resistance of the outer cover has been further enhanced, ensuring it can withstand frequent dragging and friction against rough steel drill floors or gravel-covered ground without wearing through. This provides a robust protective barrier for the internal steel-wire reinforcement layers, preventing corrosive external agents from penetrating and damaging the high-strength steel wires. All rubber layers within this lightweight hose assembly are bonded at the molecular level through a high-temperature continuous vulcanization process. The inter-layer bond strength significantly exceeds the requirements set by API standards for oil drilling and production hoses. Even under long-term, low-pressure pulsating conditions, the hose remains free from issues such as gas migration between layers or delamination-induced blistering, ensuring the structural integrity of the entire composite assembly. The hose’s overall flexibility has been optimized, featuring a minimum bend radius of just eight times its diameter. This allows for easy routing within the confined spaces of an oilfield site, enabling flexible connections without the need for forced bending. Furthermore, the hose effectively dampens high-frequency vibrations generated by operating equipment, preventing the cracking of welded joints often seen in rigid metal piping systems. Full coverage of API standards for all operational scenarios, driving cost reduction and efficiency throughout the entire lifecycle of low-pressure oilfield fluid transport. In many oilfield applications—such as the transport of auxiliary fluids or low-pressure circulation loops—conventional industrial low-pressure hoses have historically been used. These not only suffer from short service lives, leading to high procurement costs and operational downtime due to frequent replacements, but they also fail to meet the safety and access requirements mandated for oilfield operations, creating significant safety management risks. This 2SP-type, double-wire-braided, 15 MPa low-pressure hose for oil and gas drilling and production is manufactured in strict accordance with the API Spec 7K standard. Each hose undergoes a factory pressure test at 22.5 MPa—1.5 times its rated working pressure—and is supplied with comprehensive inspection records and material certification. It fully complies with the entry requirements for various oil and gas fields, effectively filling a market gap for compliant, low-pressure hoses in oilfield operations. In low-pressure mud circulation systems on drilling rigs, conventional industrial hoses often suffer from outer-layer aging and abrasion within six months. This necessitates frequent replacements, while sudden leaks can disrupt circulation operations and delay the overall drilling schedule. By switching to this 2SP double-wire-braided API hose, the service life can be extended to over two years, significantly reducing replacement frequency and eliminating production losses caused by unplanned operational downtime. Furthermore, the hose’s lightweight design simplifies routing and relocation—whether for low-pressure hydraulic control circuits during well-servicing or for the transport of compressed air and fresh water at the well site—thereby enhancing on-site operational efficiency. To suit various low-pressure applications, these hoses can be equipped with standard oilfield quick-connect couplings, hammer unions, or flanges. They are ready for immediate connection to existing well-site interfaces upon delivery, eliminating the need for complex on-site end-fitting modifications and substantially reducing installation labor in the confined spaces of a well site. For operations in the frigid climates of northern oilfields, the hoses can be upgraded with low-temperature-resistant materials; they remain flexible even in extreme cold as low as -45°C, preventing the embrittlement and cracking typically associated with low-temperature environments. During routine operations and maintenance, the health status of the hose can be quickly assessed by periodically inspecting the outer layer for visible signs of wear, bulging, cracking, or aging, and by conducting pressure testing in accordance with standard oilfield maintenance cycles. This process fully complies with the safety and operational management specifications for API-certified oil drilling and production hoses. For users engaged in oil and gas drilling and production, selecting this 2SP-type hose—featuring two layers of steel-wire reinforcement and designed for 15 MPa low-pressure service—offers significant advantages. It not only substantially reduces annual procurement costs for low-pressure fluid transfer lines but also serves as a complete replacement for non-compliant industrial hoses. By eliminating the safety risks and operational downtime caused by the frequent failure of substandard hoses, this product provides a highly reliable, lightweight, and flexible solution for low-pressure fluid transfer across all oilfield applications, fully meeting API standards.

Back to list
Case related products